Produse pentru totpremed hidrodm (17)

Used to make filling primers for HYDRONYLON ® HN on bituminous felt substrates. CONSUMPTION: 2 kg/m 2 – using SW-1 technical mesh APPLICATION: Apply the first layer of HYDRONYLON ® HP on the prepared substrate using a brush or broom . After the first layer has dried, apply the second layer of HYDRONYLON ® HP through a SW-1 technical mesh (it is also permissible to apply the first layer of HYDRONYLON ® HP directly on the prepared substrate through a SW-1 technical mesh). The base coat should be made in at least two layers. PACKAGING:25 kg COLOUR:Grey

Ingenol and its ester derivative have been used to treat various skin problems, Ingenol mebutate has been approved by both US and EU drug administrations for the topical treatment of actinic keratosis by the induction of cell death. However, its use has been withdrawn from the EU. Cat. Nr:NST-10-168 CAS:30220-46-3 Purity:98% (HPLC) Molecular formula:C20H26O5 Molecular weight:348,19

Tissu 100% LIN arm ure toile 1/1, 270g/m2, 150cm Principales utilisations mode Principales utilisations:mode

Sheets and rods.

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

Hydroxide de Potassium Pureté 90% en Paillettes. KOH, Potach

DICYCLOPENTADIENE(DCPD)85%/95% is mainly used in the manufacture of DCPD resin, unsaturated polyester resin, epoxy resin, ethylene-propylene rubber, glutaraldehyde, bis(cyclopentadienyl) iron, norbornene, adamantane and other spices, pharmaceuticals, pesticides and fine chemicals etc. REACH registration certificate available.

Cadenas laterales utilizadas en la fabricación de amoxicilina y cefadroxilo.

BTMS 50-03 - Behentrimonium Methosulfate (and) Propylene Glycol

TBC is a very good plasticizer for PVC and cellulosic derivatives. TBC improves light stability and it has good solvating properties for rubber and PVC. Since it has good low temperature properties and also is a non-toxic plasticizer, it can be used in food contact applications.

Methylhesperidin is a natural compound in the flavanone glycoside compound class. In nature, it can be most commonly found in citrus fruits together with its non methylated counterpart – hesperidin. Like hesperidin, it first was isolated from Citrus limon.sp. Cat. Nr:NST-10-128 CAS:11013-97-1 Purity:98% (HPLC) Molecular formula:C29H36O15 Molecular weight:624,59

Liquiritigenin - Flavonoids Cat. Nr:NST-10-173 CAS:578-86-9 Purity:95% (HPLC) Molecular formula:C15H12O4 Molecular weight:256,25

Synonyms: 30-Noroleanane, (+)-Glycyram, 18β-Glycyrrhizic acid monoammonium salt, Ammonium glycyrrhizinate, Glycamil, Glycymin, Magnasweet, Monoammonium 18β-glycyrrhizinate Cat. Nr:NST-10-189 CAS:6754-58-1 Purity:98% (HPLC) Molecular formula:C21H22O5 Molecular weight:354,4

Hesperitin is a natural compound in the flavanoid-type compound class. It is an aglycone version of widely spread hesperidin, which is available in various types of citrus fruits, most prominently in Citrus limon. sp. Cat. Nr:NST-10-120 CAS:69097-99-0 Purity:98% (HPLC) Molecular formula:C16H14O6 Molecular weight:302,28

Diosmetin is a flavanoid-type compound with a vast variety of biological activities. It can be found in various sources in nature, but are most natural abundance is in citrus plants like lemon, pompia, orange, tangerine, etc. Cat. Nr:NST-10-70 CAS:520-34-3 Purity:98% (HPLC) Molecular formula:C16H12O6 Molecular weight:300,26

Neohesperidin is a natural compound in the flavanone glycoside compound class. In nature, together with very similar hesperidin it can be most commonly found in citrus fruits, but especially Citrus limon.sp. Cat. Nr:NST-10-127 CAS:13241-33-3 Purity:98% (HPLC) Molecular formula:C28H34O15 Molecular weight:610,56

Synonyms: Osthenol methylether Cat. Nr:NST-10-29 CAS:484-12-8 Purity:98% (HPLC) Molecular formula:C15H16O3 Molecular weight:244,29